Showing posts with label embroidery programming. Show all posts
Showing posts with label embroidery programming. Show all posts

Wednesday, 27 January 2021

A Geek's approach to metallic thread in eight easy stages. Part 2: Needles

Sewing machine needles aren’t really very exciting things to look at.  At a show like Festival of Quilts the customers aren’t 10 deep to buy needles.  Needles are usually sold in little packets which on first sight can all look the same. However they are the first thing that I look at when trouble shooting a problem with stitch out.  My best top tip in problem solving is to change the needle for a new one.  Hang on to the old one and if that isn’t the problem then you can always swap it back. Some say you should change your needle every time you start a new project. Schmetz recommend you change your needle every 8 hours.  Now you might think ‘Well they would say that, wouldn’t they’ but I have found that as soon as I start to have frequent thread breakage I will change the needle and frequently that will solve the issue.
I will not use a needle unless it’s a Schmetz or an Inspira one; I am sure there are other good brands, its just I know these needles work for me.  I know how to get them; I think they are well priced; they get me good results.

So lets talk a bit about the engineering and whats going on with a sewing machine needle.  A sewing machine needle has a shank (the bit that goes into the needle holder on the machine) and blade that ends in the point where the eye is.  The blade has a long grove that allows the thread to reach the eye and a scarf (flat bit)  at the back to help it pass through. Whilst the shank is standard, the blade, tip and eye are all variable.  Choosing the ‘right’ needle is like Goldilocks….you want it to make a hole that allows the thread to pass through but small enough that the hole is visible.  I personally try and go with and a solid heavy weight needle of about 14/90 although I’ve been using 12/80s lately.

But in my humble opinion it’s the eye of the needle that is key to working with metallic….so unsurprisingly I use a metallic needle.  The eye is much longer than the eye in standard needle and therefore the thread is not put under the same pressures.  I find this longer eye reduces shredding and breakages with any kind of delicate or fussy thread and I use them as standard now in my embroidery machines no matter what thread I am using.  The only time I dont anymore is if I need a jersey or a ballpoint needle because of the fabric I am working on.  I don’t find that they break more (although I have heard that they can be a little less robust than say a denim or topstitch needle).

And of course I have a pile of used, slightly dull metallic needles that aren’t blunt so I then wear them out on my conventional machine doing day to day sewing; think of it like the dressage horse handing its old competition saddle down to the Lord of the manor's horse.

Tuesday, 12 April 2016

Meet the boys



October 2013: a young woman leans over a medical technician and takes a photograph of a computer monitor with her mobile phone. On the screen are images of the two bundles of cells that the technician is about to implant in her womb. The woman was my partner’s sister, Lynsey Mogg, and the cells go on to grow into her two sons, Rufus and Rafe.

I think this image is one of the most remarkable photos I have ever seen in my life.  

 It’s the starting point for the Paths to Utopia project that will be at Somerset House this summer.  The plan is that  the image will be printed onto fabric and then embroider speakers into it to make a ‘singing quilt’.  The quilt will then play a sound file of the boys when you are in front of the piece.

Oh yes, and this is how they looked when they had a very exciting afternoon out at the park near our house.

This project is made possible with the support of The Cultural Institute at King’s College London, premiering as part of Utopia 2016.

Tuesday, 12 January 2016

Embroidered Speakers Part 1



We have begun developing the embroidered speakers for the Paths to Utopia project.  I am working with Dr Matthew Howard from the Centre for Robotics Research, KCL and one of his students Bowen Han.  The samples in the picture are a variety of stitched wires and conductive threads.   Unusually for me these first samples were all free motion embroidered by hand with a mixture of couching and cabling.  The first test was to see if we could get signal to go through the circuits and we managed it on all the samples.  Of course some samples were better than others but we could get an audible but quiet ‘buzz’.  That was because we weren’t amplifying the signal but we will look to try and do that later in the process.
The next stage was to actually digitally embroider the speakers for two reasons.  We can accurately measure the length of the thread so we can then accurately work out the electronics and secondly because they do look lovely when they are done that was.

This project is made possible with the support of The Cultural Institute at King’s College London, premiering as part of Utopia 2016. 

Tuesday, 17 November 2015

Game On



I am very excited to have a project selected as part of Utopia, a festival marking the 500th anniversary of Thomas More’s famous book.   The festival will be hosted at Somerset House, the Courtauld Institute of Art and the Cultural Institute at Kings College London in 2016.  We are hope to be installing work in the Inigo Rooms at Somerset House during the summer.  
http://utopia.somersethouse.org.uk/
I will be once again collaborating with Dr Matthew Howard and the Centre for Robotic Research at Kings College London.  We plan to combine e-textiles with digitally printed and stitched textiles to make art quilts that respond to the audience’s presence.  Those of you who know me well will know that I am passionately interested in bio medical data and this will be a theme within the work.  We will look at the positive effect IVF has had on peoples’ lives.
Just as with the Cloth and Memory 2 exhibition and the Crafts Council Parallel Practice residency I will be blogging about the progress of the project and I hope you will enjoy following the story.

Wednesday, 29 July 2015

Festival of Quilts 2015



I am very, very excited to have a piece shortlisted for the Fine Art Quilt Masters prize at Festival of Quilts this year.  The prize is one of the biggest competitions in the quilt world in Europe.
I can’t show you the piece as that would invalidate my entry but it is from the ‘Error bred in the bone’ project up at BARC, University of Bradford.  It’s based on an x-ray of a skull from a medieval cemetery attached to a leper’s hospital in Chichester, and the archaeological dig plans of the site.
The image above is also from the ‘Error bred in the bone’ project and is a detail of an archive x-ray from a leper’s hospital in Addis Ababa from the 1980s.  This piece is in the Quilt Art 30th anniversary exhibition ‘Small Talk’ which is in the gallery section of the Festival of Quilts.  This show of smaller pieces is the companion show to Dialogues which will open at the Quilt Museum in York in September.  You can buy the accompanying catalogue here. http://www.quiltart.eu/quiltartpublicat.html
AND finally I will also be on the Festival panel discussion ‘How does a quilt become a piece of fine art?’ along with Sue Prichard, Keeper of Textiles at the V&A, Dr Sue Marks, Helen Parrott, and my dear Danish friend Charlotte Yde on Friday 7th August, 12.15pm - 1.00pm.  A big subject for a 45 minute discussion!  You can find out more and book tickets here.
http://www.thefestivalofquilts.co.uk/Content/Panel-Discussions/8_42/
So it will be a very busy Festival of Quilts for me.  If you don’t see me on the Fine Art Quilt Masters gallery, or the Quilt Art Small Talk exhibition, or the panel discussion then you’ll find me on the Pfaff stand driving the long arm Powerquilter.  Please come along and say hello!